stainless steel pipe size table

A Stainless Steel Pipe Size Table offers an invaluable resource for anyone in a trade that encompasses pipe production or sales. The table provides a speedy and effortless means of pinpointing the precise pipe size for any given need. Its two sections are subdivided into Standard Sizes and Special Sizes. The Standard Sized section is based on the Nominal Bore (NB) system while the Special Sized section is determined by the Outside Diameter (OD) system. In short, it provides manufacturers and merchants with a dependable way to identify ideal pipe measurements.

Spanning across less than one-fourth of an inch (12.7 mm) to over 11ft (3,658 mm), pipes of various diameters and wall thickness can be organized and referenced using the list below. The nominal bore is presented in inches (25.4 mm), the outside diameter is measured in millimeters (mm), and the schedule outlines the pipe wall’s girth in inches (25.4 mm).

From small to large, two categories of sizing can be found in measuring piping: the first includes diameters between 0.5 and 8 inches (12.7 mm to 203.2 mm) respectively, while the latter verges 8.1 inches through 144 inches (205.7 mm and 3,658 mm respectively).

From a 0.5 inch (12.7 mm) diameter all the way up to 36 inches (914.4 mm), the special sizes cater to pipes of many sizes.

For those in pipe-related commerce, the table proves to be an extremely advantageous asset. It allows for a swift and seamless process for discovering the ideal bore size – customized or standard – for each special use. Segregation into two divisions takes place on the table. A textbook configuration corresponding to the Nominal Bore system encompasses the standard measurements, while an Outside Diameter based assessment applies to the special varieties.

The qualities of pipes may be established by referencing the table, which details the nominal bore size in inches (25.4 mm increments) as well as the outer diameter in millimeters (mm) and the pipe wall’s thickness in inches (25.4 mm). Spanning 0.5 inches (12.7 mm) to 144 inches (3,658 mm), this table provides an inclusive guide to pipework.

Two sets of measurements are used to classify pipe diameters: those ranging from 0.5 inches (12.7 mm) to 8.0 inches (203.2 mm), and those spanning 8.1 inches (205.7 mm) to a whopping 144 inches (3,658 mm).

Pipes with diameters from 0.5 inches to 36 inches (conversion range of 12.7 mm to 914.4 mm) can be custom ordered in a variety of special sizes.

Pipework of various kinds have been created to stand the test of time; stainless steel, iron, copper, and plastic all feature among these offerings. What stands out the most, however, is stainless steel pipe – a go-to option for commercial and industrial settings. Not only is it tough and rust-resistant, but it’s straightforward to clean and maintain too.

Those in the market of making and supplying pipes have a useful addition to their arsenal – the table. Through scanning it, they are able to swiftly discover just the right size pipe for any requested application. Divided into two segments, it offers standard sizes according to Nominal Bore (NB) values, as well as special sizes based on Outside Diameter (OD).

The chart provides the nominal bore in inches (corresponding to 25.4 mm), the external diameter in millimeters (mm), and the thickness of the pipe’s wall in inches (matching 25.4 mm). This data covers pipes in a spectrum of 0.5-inch (12.7 mm) to 144-inch (3,658 mm) diameters.

Spanning a full spectrum from diminutive to colossal, the standard pipe sizes are sorted into two distinct categories: those with an internal measurement ranging anywhere between 0.5 and 8 inches (12.7 mm to 203.2 mm), and those between 8.1 and 144 inches (205.7 mm and 3,658 mm).

Pipe diameters can differ greatly in size, from a meager 0.5 inches (12.7 mm) to a colossal 36 inches (914.4 mm).

Boasting strength, durability, and corrosion-resistance, stainless steel pipes have become the most popular pick for industrial and commercial applications. However, other materials, like iron, copper, and plastic are utilized in the manufacturing of pipes as well. Thanks to its straightforward maintenance and cleaning needs, stainless steel pipes stand out amongst its counterparts.

Related Product