stainless steel hollow pipe weight char

When comparing 304 and 316 grades of stainless steel, it’s easy to spot one of the key differences, specifically their density. While 304 has a density of 0.79 g/cm3, 316 ups the ante at 0.95 g/cm3. Yet, despite the variance in density, the two grades also differ in terms of weight due to their distinct chemical compositions.

To calculate the weight of a hollow stainless steel pipe, you need to consider its volume. A precise formula exists to aid in the calculation process:

The correlation between weight (kg/m) and volume (cm3) can be expressed as 0.034715.

To provide an example, the mass of a stainless steel conduit measuring 100mm by 100mm with a wall thickness of 0.5mm and a depth of 6mm (4″ x 4″ x 0.25″) shall amount to:

The weight of a given item can be ascertained by multiplying 0.034715 by one hundred, then multiplying the product of that by one hundred again, and finally multiplying the summation of those by six and halving the result.

Equating to 10.34 Kilograms per Meter, the Article Entails.

To accurately assess the heft of a stainless steel pipe, the formula referenced earlier is the way to go. It’s key to keep in mind that the densities of assorted grades of this wonder material can differ significantly; such as 304 stainless boasting a density of 8.03 g/cm3 and 316 stainless displaying 8.79 g/cm3.

Accurately assessing the heft of a stainless steel conduit necessitates utilizing the right density value of the particular stainless steel class in question.

Stainless steel pipes vary in weight depending on the wall thickness. To illustrate, a 100mm x 100mm x 6mm (4″ x 4″ x 0.25″) pipe with a 1mm wall will be heavier than one with a 0.5mm wall. Thus, a thicker wall adds to the total weight of the pipe.

Considering the weight of a stainless steel pipe necessitates taking into account many influencing variables, such as the grade of stainless steel used. Each grade carries varied densities, thus making precise calculations of the pipe’s weight a must. Additionally, the wall thickness of the pipe must be considered–heavier pipes having thicker walls.


Post time: 2023-06-29

Related Product

  • Stainless steel flange

    Stainless steel flange

      Stainless steel flange Stainless steel flange is mainly used for pipe connection in pipeline engineering. INTRODUCTION Stainless steel flange is mainly used for pipe connect […]

  • Stainless steel square tube

    Stainless steel square tube

    Stainless steel 201 304 square tube, durable, stainless steel square tube for building decoration   Stainless steel square tube is a kind of hollow long steel, because the sec […]

  • Billet 420 round steel 3.0-300mm 420 stainless steel bar good straightness quenching and tempering treatment

    Billet 420 round steel 3.0-300mm 420 stainless steel bar good straightness quenching and tempering treatment

    Billet 420 round steel 3.0-300mm 420 stainless steel rod straightness is good Quenching and tempering treatment 2Cr13 stainless steel has high hardness and good corrosion resistanc […]

  • 38BA clean pipe ss304 stainless steel pipe ferrule connection stainless steel pipe

    38BA clean pipe ss304 stainless steel pipe ferrule connection stainless steel pipe

    Product name  3/8 “BA clean pipe ss304 stainless steel pipe ferrule connection biopharmaceutical fluid delivery Classification  BA clean pipe/EP super clean pipe Product Desc […]

  • stainless steel Straight Tee

    stainless steel Straight Tee

    Stainless steel tees are pipe fittings and pipe connectors. It is used at the branch pipe of main pipe. Stainless steel tees can be divided into equal diameter tees and reducing te […]

  • Stainless steel grooved pipe Stainless steel special-shaped pipe

    Stainless steel grooved pipe Stainless steel special-shaped pipe

      The stainless steel grooved pipe is a kind of stainless steel profiled pipe. The stainless steel profiled pipe is the general name of the steel pipes of other cross section […]

  • Stainless steel 90 ° elbow

    Stainless steel 90 ° elbow

    In a piping system, an elbow is a fitting that changes the direction of a run. Product introduction The 90 ° stainless steel elbow is composed of fabric reinforced stainless steel […]

  • Stainless Steel Capillary Pipe Tube

    Stainless Steel Capillary Pipe Tube

      304 stainless steel capillary tube 316L precision seamless tube manufacturer of ultra small caliber thin-walled tube for medical instruments texture of material:304、316 Spec […]

  • Stainless steel coil 316L 304 201 310S stainless steel cold rolled coil wiredrawing film

    Stainless steel coil 316L 304 201 310S stainless steel cold rolled coil wiredrawing film

    Thickness specification of stainless steel strip – table (full page length and width can be customized by zero cutting)   0.05mm 0.1mm 0.15mm 0.2mm 0.3mm 0.4mm 0.5mm 0.8 […]