8 schedule 10 stainless steel pipe pressure rating

To determine the pressure rating for Schedule 10 stainless steel pipe, look up the specifications in a pressure rating table. This table will provide the maximum working pressure for different diameters and wall thicknesses of each size of pipe. The appropriate pressure for a particular pipe can be calculated by combining its diameter and wall thickness measurements.

As the diameter of Schedule 10 stainless steel pipe increases, the maximum allowable pressure for it diminishes. Take for instance, a 3/8-inch pipe; it can withstand a pressure of 3,000 pounds per square inch while a one-inch pipe in the same category is only able to take a maximum of 1,000 psi.

The data from the table indicates that as a Schedule 10 stainless steel pipe’s thickness grows, so does its decline in maximum working pressure – a wall of 0.5 inches holding a whooping 2,000 psi but with an increase to 1.0 inches, that strength diminishes to only 1,000 psi.

Generally speaking, the maximum tolerable pressure for a Schedule 10 stainless steel pipe is contingent on its grade. As the rank of material increases, so too does its possible strain capacity. For example, pipes constructed from Grade 304 stainless steel have the highest working pressure certified at 2,000 psi; meanwhile, its superior brethren, Grade 316 stainless steel pipes can withstand a pressure of up to 3,000 psi.

The ability to expend pressure while transferring fluids through Schedule 10 stainless steel pipe is dictated by the temperature of the said fluid. At a searing 200F, the maximum allowable working pressure would be a robust 1,000 psi; however, once this climbs up to 400F, the pressure potential drastically drops to a meager 500 psi.

When considering the limits of the working pressure for Schedule 10 stainless steel pipe, one key factor that comes into play is the nature of the liquids inside. The pH level of the fluid transported will impact its maximum allowable pressure; the more caustic its acidic composition, the narrower the range. For instance, a passage having a pH balance of 2 is capable of operating under 1,000 psi while one with a less-corrosive 4 will be restricted to 500 psi.

In order to effectively decide on the greatest feasible operating pressure for piping composed of Schedule 10 stainless steel, one must take into account all existing contributing factors.


Post time: 2023-06-22

Related Product

  • Stainless steel 90 ° elbow

    Stainless steel 90 ° elbow

    In a piping system, an elbow is a fitting that changes the direction of a run. Product introduction The 90 ° stainless steel elbow is composed of fabric reinforced stainless steel […]

  • Stainless steel flange

    Stainless steel flange

      Stainless steel flange Stainless steel flange is mainly used for pipe connection in pipeline engineering. INTRODUCTION Stainless steel flange is mainly used for pipe connect […]

  • Stainless Steel Capillary Pipe Tube

    Stainless Steel Capillary Pipe Tube

      304 stainless steel capillary tube 316L precision seamless tube manufacturer of ultra small caliber thin-walled tube for medical instruments texture of material:304、316 Spec […]

  • stainless steel Straight Tee

    stainless steel Straight Tee

    Stainless steel tees are pipe fittings and pipe connectors. It is used at the branch pipe of main pipe. Stainless steel tees can be divided into equal diameter tees and reducing te […]

  • Billet 420 round steel 3.0-300mm 420 stainless steel bar good straightness quenching and tempering treatment

    Billet 420 round steel 3.0-300mm 420 stainless steel bar good straightness quenching and tempering treatment

    Billet 420 round steel 3.0-300mm 420 stainless steel rod straightness is good Quenching and tempering treatment 2Cr13 stainless steel has high hardness and good corrosion resistanc […]

  • Stainless steel coil 316L 304 201 310S stainless steel cold rolled coil wiredrawing film

    Stainless steel coil 316L 304 201 310S stainless steel cold rolled coil wiredrawing film

    Thickness specification of stainless steel strip – table (full page length and width can be customized by zero cutting)   0.05mm 0.1mm 0.15mm 0.2mm 0.3mm 0.4mm 0.5mm 0.8 […]

  • 38BA clean pipe ss304 stainless steel pipe ferrule connection stainless steel pipe

    38BA clean pipe ss304 stainless steel pipe ferrule connection stainless steel pipe

    Product name  3/8 “BA clean pipe ss304 stainless steel pipe ferrule connection biopharmaceutical fluid delivery Classification  BA clean pipe/EP super clean pipe Product Desc […]

  • Stainless steel square tube

    Stainless steel square tube

    Stainless steel 201 304 square tube, durable, stainless steel square tube for building decoration   Stainless steel square tube is a kind of hollow long steel, because the sec […]

  • Stainless steel grooved pipe Stainless steel special-shaped pipe

    Stainless steel grooved pipe Stainless steel special-shaped pipe

      The stainless steel grooved pipe is a kind of stainless steel profiled pipe. The stainless steel profiled pipe is the general name of the steel pipes of other cross section […]